How much gravel do I need?
For driveways, paths, and drainage. Get tons for a bulk delivery, cubic yards, or bags.
Gravel to order
6.9 tons
Estimated material cost
Gravel to order
6.9 x $$45.00 per ton
$311
Typical store prices before tax and delivery. Change any price to match your store.
How to measure
Measure the length and width of the area in feet and decide how deep the gravel should be in inches.
Tips from the field
- Figured at about 1.4 tons per cubic yard. Crushed stone and river rock weigh a little differently.
- A gravel driveway usually needs 4 to 6 inches over a firm, packed base.
What you'll need
Common questions
How many tons of gravel are in a yard?
About 1.4 tons for typical crushed gravel. Pea gravel and river rock are close. Lightweight stone is less.
How deep should a gravel driveway be?
Four to six inches of gravel over a firm, packed base. New driveways often need 8 to 12 inches in layers.
What gravel is best for a driveway?
Crushed stone with fines, sometimes called crusher run or road base, packs down firm. Round pea gravel rolls under tires.
Add this calculator to your websiteFree
Contractors, bloggers, and real estate agents can put this calculator on their own site for free. Copy the code below and paste it into any page.
More for driveway and concrete
Concrete calculator
How much concrete do I need?
Paver calculator
How many pavers do I need?
Asphalt driveway calculator
How much asphalt do I need?
Asphalt sealer calculator
How much driveway sealer do I need?
Rebar calculator
How much rebar do I need for a slab?
Concrete steps calculator
How much concrete do I need for steps?
Post hole concrete calculator
How much concrete do I need for fence posts?
Printed from housecalcs.com/tools/gravel-calculator